Kitchen Countertops

Kitchen Countertops

Provide daily cleaning to marble/granite countertops, solid surfacing countertops, lamination countertops and man-made tile countertops.

Product needed: SCL STONECLEAN-Xtra (pH9.6)

1.2

 

 

 

 

 

Direction to use:

  • Dilute 2 to 4 capfuls of SCL Stoneclean-Xtra with water in a spray bottle.
  • Just spray, clean with a cloth or scrub the surface with the help of the Red pad.
  • Rinsing with water is required.

* Capful refers to 5-litres size bottle cap

Cautions:

  • Do not use “Black” pad on polished surface marble, granite and solid surface kitchen counter-top.
  • Do not share the same pad when used in the kitchen and bathroom.

Available at Home-Fix DIY stores and E-Store: www.stoneclean.sg

Preventive measures provide to Marble/Granite Countertops.

Product needed: SCL Oil Repellent Sealer

3.1

 

 

 

 

 

 

SCL-Oil Repellent Sealer is designed to prevent water & oil fluids from entering the porous marble and granite countertops. It allows you to wipe off the stain on the marble or granite surface within 12 hours.

Benefit:

The sealer does not block the capillaries of the stone to “breathe” i.e. it allows vapor transmission.

Notes:

  • SCL Oil Repellent Sealer does not make the stone surface acid resistant or water proof.
  • Remove penetrated stain using the poultice method before apply SCL Oil Repellent Sealer.

Caution: Use in a well ventilated area.

Usage: Re-apply SCL Oil Repellent Sealer half yearly or when needed.

Direction to use: 

    •  Surface must be dry before sealer’s application.

  • Prepare a tray and a roller brush. Put sealer into the tray. Begin to roll the sealer in a small area. A second application is recommended to apply 30 minutes in between coat.
  • Do not allow the sealer to dry on the surface for the last coat.
  • While the sealer is semi-dry, immediately use a dry paper towel or dry cloth to rub the sealer in a circular motion until original luster is obtained.
  • Number of coats shall depend on the porosity of the stone. Generally, polished surface only required one coat.
  • Refrain the surface 48 hours to contact with water (i.e. washing or cleaning with a wet cloth).

Home-Fix DIY stores are available.