SCL RA1 & SCL DPP Poultice Powder

remove…

    blood stain
    burn mark
    cardboard stain
    cigarette
    coffee & tea
    curry
    dark mark
    food stain
    lacquer stain
    perspiration
    urine
    wine
    wood stain
    tape-mark

1.-Technical-Bulletin-RA1-&-DPP-Page1

TECHNICAL BULLETIN
Descriptions/Features
SCL-RA1 chemical is designed to mix with SCL-DPP Poultice Powder to remove yellowing stain on limestone, blood stain, burn mark, cardboard stain, cigarette, coffee & tea, curry, dark mark, organic stains, lacquer stain, perspiration, urine, wine, wood stain, tape-mark, etc….

Application on the type of stone:
On all types of natural marble and granite stone EXCEPT compressed marble.

Benefit:
Does not require a polish when used on a polished surface marble and granite.

Available packing size for RA1 chemical: 1-litre / 25-litres
Available packing size for DPP Poultice Powder: 500 grams / 5kg / 10kg
5kg and 10kg are packed in carton boxes.

Approximate coverage for 1.0sq.ft.
300ml of SCL-RA1 chemical required 125grams of SCL-DPP Poultice Powder.

Poultice Procedures:
Step 1. Remove topical coating, (if any).
If a thin film of coating is noted, removed with SCL-XY stripper before poultice. Otherwise, you are poulticing on the wax coating.

Step 2. Prepare the poultice.
Mix SCL-DPP Powder with SCL-RA1 into a paste about the consistency of a creamy peanut butter.

Step 3. Apply the poultice.
Carefully apply the poultice to the stained area. Not too thin, generally about 1/4 inch thick is sufficient for most stains.

Step 4. Cover the poultice.
Cover the poultice with a clear thin transparent plastic sheet or a plastic food wrap. Tape the poultice with a low adhesive paper masking tape.

Step 5. Remove the poultice.
Remove the poultice after 48 hours. Dispose them in a plastic bag. If the stain is lightened, you
possibly need a second attempt. Clean the residues of the poultice with SCL-STONECLEAN or SCL-STONEMIST.

Important Notes:

  • Do not use RA1 chemical directly on compressed marble as it will cause discoloration to the stone.
  • RA1 is not allowed to mix with SCL-PPP Poultice Powder.
  • Put on gloves while handling this product.
  • Put on half-faced respiratory mask when you are applying RA1 in an enclosed area.
  • Disposed big quantity of this chemical properly according to manufacturer advice.

Purchasers are required to test the suitability of the product for their intended use. Mcare Lab Pte Ltd makes no warranty, expressed or implied on the products and the effects. Mcare Lab Pte Ltd shall not responsible for any risks or liabilities, direct, indirect or consequential arising out of the used or the inability to use the product.