SCL Oilift Remover

    remove…
    surface engine oil
    spillage of hydraulic oil
    spillage of boom lift oil

Untitled

TECHNICAL BULLETIN
Descriptions/Features
SCL OILIFT REMOVER is a solvent-based ready-to-use product designed to remove “fresh” surface oil stain.

Application on the type of stone: On all types of natural stone and man-made tiles.

Direction to use: Send request to Mcare Lab for application procedure. Application procedure shall depend on severity of stain, age of stain and different texture of stone/tile surface.

Available packing size: 1-litre / 3.8-litres / 20-litres
Export packing size: 1-litre / 3.8-litres / 20-litres

    Important Notes:

  • Do not use high-pressure water jet or any acidic detergent to remove oil stains.
    High-pressure water jet pushes the oil deeper into the interior of the stone and acidic detergent will bind the oil stain permanently with the stone.
  • Remember to rinse with SCL Stoneclean-Xtra(pH9.6) after using SCL Oilift Remover to achieve best result.
  • Immediately contact Mcare Representative, severe oil spillage can be removed with confidence.
    Precautions:

  • Wear gloves when handling the product.
  • Always test on a small area first.
  • This product is intended for professional use. Otherwise, the user should be guided by Mcare Specialists or its authorized representatives.
    Cautions:

  • DO NOT use a wet/dry vacuum to pick up SCL Oilift Remover chemical alone.
  • It may start the spark and ignition.
  • Dot Hazard Class: Flammable Liquid
  • Incompatible materials: Strong oxidizing agents.

Purchasers are required to test the suitability of the product for their intended use. Mcare Lab Pte Ltd makes no warranty, expressed or implied on the products and the effects. Mcare Lab Pte Ltd shall not responsible for any risks or liabilities, direct, indirect or consequential arising out of the used or the inability to use the product.